What should be paid attention to when using granulator

The production efficiency of single screw granulator is high. It integrates internal mixing, lifting, feeding, extrusion, air cooling and hot pelleting, air cooling and cooling. It can be used to extrude degradable masterbatch, polyamide polycondensation and polyurethane polymerization. So what should we pay attention to in the process of using single screw granulator?

1. It is strictly forbidden for irrelevant personnel to talk with the equipment operator, and only one person is allowed to operate the button command on the electronic control panel.

2. Regularly check the insulation effect of wires and circuits, and always pay attention to the warning content on the warning board of the machine.

3, before the power distribution cabinet has been cut off, it is strictly forbidden for non professional personnel to open the cabinet door; it is strictly prohibited to adjust the cutter before the cutter is completely stationary.

Jwell pet granulator

4. When the moving parts and hopper are blocked, do not use hands or iron bars, but only use plastic bars to handle them carefully.

5. When touching high temperature parts, be careful of scalding; when kneading machine is working, it is strictly forbidden for workers to extend their upper body into the barrel to visit or pick up materials.

6. In case of power failure, the motor circuit should be cut off and the materials in the machine should be cleaned up in time, otherwise the next production will be affected after the carbonization of the materials.

7. When the machine breaks down, stop the machine operation in time, and do not claim it on your own. And inform and wait for the maintenance personnel to check and repair or telephone to guide maintenance.

8. To prevent all factors leading to machine damage and industrial accidents.