Plastic shredder under the discharge blockage how to do?

Plastic shredder is a kind of solid waste volume reduction and environment-friendly shredding equipment. The blade is made of high-strength alloy steel, with strong wear resistance and high strength. The differential operation between the shafts has the functions of tearing, extrusion and occlusion. It is specially designed for the shredding of plastic barrels. It has the advantages of uniform discharge, large output and low noise. The electrical part adopts Siemens electrical components programming control, with automatic detection, overload protection and other functions.

Manufacturer of plastic shredder

Especially suitable for shredding: plastic cans, garbage cans, beverage bottles, paint cans, etc. As a kind of blade shredder, the plastic shredder mainly uses the cutting and closing effect of moving knife and fixed knife to cut and destroy the materials entering the machine cavity. In this process, the shredded materials are discharged through the screen after shearing, while the plastic shredded materials larger than the screen aperture roll upward under the effect of internal air flow and enter the cutting area of the knife edge again for further cutting Tear it up. In the plastic shredder material blocking or no cutting phenomenon, we should analyze from the operation principle of the equipment.

1. There is too little material in the machine cavity, and the plastic shredder formed by the material rolling upward driven by the air flow inside the machine cavity will not discharge. The solution is to continuously add materials.

2. If the blade gap is too large, it will not be cut because when different materials are damaged, the blade gap of the plastic shredder should be adjusted so that the materials can be damaged repeatedly. Solution: adjust the blade gap to the right position.

3. The hole diameter of the screen is too small, the crushed materials fall too fast, and the bottom of the screen is blocked.

3. For large-scale plastic shredder, it is generally equipped with discharging transportation organization. During production, customers need to adjust the discharging device according to the practical materials, so as to prevent the blocking at the bottom of screen caused by too slow discharging speed.