How to maintain the blade of double shaft shredder?

The following plastic shredder manufacturers to introduce you to the double shaft shredder blade how to maintain?

1. When installing the blade of the double shaft shredder, the flange nut must be properly tightened. If the blade is too loose, it will slip when rotating and cutting. If the blade is too tight, it will have internal injury or deformation, which will affect the cutting effect.

2. Regularly check the radial runout of the main shaft of the machine and the swing to ensure that the blades of the double shaft shredder match each other.

3. Before cutting, the operator must take protective equipment and check whether the protective cover of the saw is in good condition.

4. The operation of the saw blade can be more stable by using the flange as large as possible. The size of the flange should be consistent. The size of the flange should be 1 / 3 of the diameter of the saw blade, and the sawing effect is better.

5. The blade of the double shaft shredder should idle for 30 seconds after it is installed stably, and then start cutting after it is confirmed that everything is normal.

6. The alloy head of the double shaft shredder has a sharp and sensitive edge, so the alloy head must be carefully protected from damage during the movement, installation and disassembly of the blade.

7. The debris on the spindle and flange must be removed before installing the blade of the double shaft shredder. The flange surface shall be flat and clean and intersect with the shaft vertically.

The above is how to maintain the blade of the double shaft shredder after a long time? This topic has been explained in detail. Please consult Dayun Environmental Protection Technology Co., Ltd.

Double shaft shredder