Welcome to Changzhou Dyun Environmental Technology Co.,Ltd

中文 | EN | Sitemap | RSS | XML

24-Hour hotline:

+86 18851222688

pet造粒机
Your current location : Home >> News >> Featured reading

What are the requirements for your working environment and inspection?

2021-01-25 21:35:08
Times

Plastic shredder is a kind of heavy mechanical equipment for crushing and tearing materials. The working environment of this equipment is very strict. First of all, the speed reducer of the shredder works at - 10 ℃ ~ 40 , which is easy to cause damage to the speed reducer. It is not allowed to use high-pressure water gun and other materials with excessive impact force to clean the reducer of shredder, so as to avoid damage. Add lubricating oil to the reducer timely to protect it. The blade of the shredder is an important part of the shredder. If it is worn or blunt, it should be repaired or replaced in time. The multi claws of the shredder should be repaired in time, and the inspection and maintenance of the blade of the shredder should be done well at ordinary times. Shredder has a unique hydraulic slide design, this design, for the operation, will play a more safe and convenient role.



塑料撕碎机

 

 

Plastic shredder

1、 The inspection of shredder is also strict

 

1. Oil supply of multipoint dry oil pump and its pipeline.

 

2. Whether the adjusting position of wedge adjusting block meets the design technical requirements.

 

3. Observe whether there is a place where they are stuck and touching each other, and start the machine only after everything is normal.

 

4. Confirm the direction of rotation, test run the motor separately for 2 hours, and check the bearing temperature.

 

6. The flywheel can avoid the dead point and overcome its inertia when starting.

 

7. Install the V-belt and adjust its tension and parallelism between the two wheels.

 

8. Before starting the shredder, the dry oil pump must be started to add oil to each lubricating point.

 

9. The no-load test run is 4h, and the shredder shall meet the following requirements during operation:

 

2、 There should be no abnormal sound between the elbow plate and the elbow plate seat.

 

3、 There should be no loud noise between the locking spring and the pull rod.

 

4、 The bearing temperature rise shall not be greater than 30 . No abnormal fluctuation is allowed.


Recently Viewed:

Changzhou Dyun Environmental Technology Co.,Ltd

TEL:0519-87070068

Fax:0519-87071688

E-mail:sales@jwell.cn

Complaint:info@jwell.cn

Add: No.118,shangshang Road,Licheng Town,Liyang,Changzhou city,China


Navigation

Home About Product

News  Case   Inquiry

Contact

Follow us

塑料撕碎机

Official Account

Copyright © http://en.dyun.cn/ Changzhou Dyun Environmental Technology Co.,Ltd Specializing inJWELL Machinery, plastic shredder, pet granulator
Icpcode:苏ICP备19044966号     Support:Dingma Information Technology
Disclaimer: Some of the content pictures on this site are from the Internet. If there is any infringement, please contact the administrator to delete it. Thank you!